PENGARUH FRAKSI VOLUME TERHADAP KUAT TEKAN DAN LENTUR KOMPOSIT BERPENGUAT SERBUK KAYU ULIN (Eusideroxylon Zwageri) BERMATRIK POLYESTER
DOI:
https://doi.org/10.34128/je.v8i2.168Keywords:
Composite, Ironwood Powder, Polyester., komposit, serbuk kayu ulin, polysterAbstract
Komposit merupakan hasil rekayasa dua atau lebih bahan dimana sifat masing-masing bahan berbeda satu sama lainnya. Material komposit terdiri dari matriks dan penguat (reinforcement). Matriks biasanya terbuat dari serat alam seperti serat tumbuhan dan penguatnya berupa resin. Komposit pada penelitian ini berbahan baku serbuk kayu ulin dan bermatrik polyester dengan variasi komposisi 5%:95%, 10%:90%, 15%:85%, 20%:80%, dan 25%:75%. Komposit ini kemudian diuji tekan dan lentur. Dari pengujian diketahui bahwa semakin besar komposisi serbuk kayu ulin maka semakin besar kekuatan kompositnya.
References
[1] Gibson, F.R., f1994, Principle of CompositefMaterial Mechanis, international Edition, McGraw-Hill Inc, NewfYork.
[2] Gañan Piedad and Iñaki Mondragon. (2005). Effect offFiber Treatments on Mechanical Behavior of Short FiquefFiber-reinforcedPolyacetal Composites. Journalfof Composite Materials 2005; 39; 633 DOI: 10.1177/0021998305047268. Thefonline version of this article can be found at: http://jcm.sagepub.com/cgi/content/abstract/39/7/633.
[3] Ashby, M.F, Jones, D.R.H. (1986). EngineeringfMaterial 2 An Introductionfto Microstutures Processing andfDesign,1st Edition.
[4] Schwart, M.M., 1984, CompositefMaterials Handbook, Mc Graw-Hill BookfCo., New York.
[5] Flach, M & F. fRumawas. 1996. Plants Yielding Non-SeedfCarbohydrates. PlantResources of South-East Asiaf (PROSEA). 9:97- 100.http://www.prosea.org Diakses tanggal 20 Desember 2010.
[6] ASTM. D 256 – 00fStandard test methods for determiningfthe izod pendulumfimpact resistance of plastics.
[7] ASTM. D 790 Standardftest methods for flexural propertiesfof unreinforced and reinforced plastics and electrical insulatingfmaterial. Philadelphia, fPA : AmericanfSociety for Testing andfMaterials.
[8] Lusi1 Nuraini (2017), AnalisisfPenambahan Serat Jerami Terhadap Karakteristik Kuat Tarik Komposit Frp (FibefReinforcement Plastic), JurnalfROTOR, Edisi Khusus LNuos.i,3N, uDreasienmi,bJeurr2n0a1l 7ROTOR, Edisi Khusus No. 3, Desember 2017
[9] Maldas D, Kokta BV, Daneaulf C. (1989). J Appl Polym Sci 1989; 37: 751–775. Mittal KL. (1992). Silanes and otherfcoupling agents. fNetherlands:VSPBV. Gapsari, F. (2010). Pengaruh FraksifVolumefTerhadap Kekuatan TarikfDan Lentur Komposit Resin Berpenguat SerbukfKayu.
[10] Monteiro, S.N., L.A.H. Terrones, J.R.M. D’Almeida. (2008). Mechanical performance of coir fiber/polyesterfcomposites. Polymer Testing 27 (2008) 591– 595.
[11] Saidah Andi, (2018), PengaruhfFraksi VolumefSerat Terhadap Kekuatan Mekanik KompositfSerat JeramifPadi Epoxy Dan Serat JeramifPadi Resin Yukalac 157 E-ISSN : 2622-5565 https://doi.org/10.21009/JKEM.5.2.7fJurnal Konversi Energi dan Manufaktur UNJ, Edisifterbit II –Oktoberl 2018
[2] Gañan Piedad and Iñaki Mondragon. (2005). Effect offFiber Treatments on Mechanical Behavior of Short FiquefFiber-reinforcedPolyacetal Composites. Journalfof Composite Materials 2005; 39; 633 DOI: 10.1177/0021998305047268. Thefonline version of this article can be found at: http://jcm.sagepub.com/cgi/content/abstract/39/7/633.
[3] Ashby, M.F, Jones, D.R.H. (1986). EngineeringfMaterial 2 An Introductionfto Microstutures Processing andfDesign,1st Edition.
[4] Schwart, M.M., 1984, CompositefMaterials Handbook, Mc Graw-Hill BookfCo., New York.
[5] Flach, M & F. fRumawas. 1996. Plants Yielding Non-SeedfCarbohydrates. PlantResources of South-East Asiaf (PROSEA). 9:97- 100.http://www.prosea.org Diakses tanggal 20 Desember 2010.
[6] ASTM. D 256 – 00fStandard test methods for determiningfthe izod pendulumfimpact resistance of plastics.
[7] ASTM. D 790 Standardftest methods for flexural propertiesfof unreinforced and reinforced plastics and electrical insulatingfmaterial. Philadelphia, fPA : AmericanfSociety for Testing andfMaterials.
[8] Lusi1 Nuraini (2017), AnalisisfPenambahan Serat Jerami Terhadap Karakteristik Kuat Tarik Komposit Frp (FibefReinforcement Plastic), JurnalfROTOR, Edisi Khusus LNuos.i,3N, uDreasienmi,bJeurr2n0a1l 7ROTOR, Edisi Khusus No. 3, Desember 2017
[9] Maldas D, Kokta BV, Daneaulf C. (1989). J Appl Polym Sci 1989; 37: 751–775. Mittal KL. (1992). Silanes and otherfcoupling agents. fNetherlands:VSPBV. Gapsari, F. (2010). Pengaruh FraksifVolumefTerhadap Kekuatan TarikfDan Lentur Komposit Resin Berpenguat SerbukfKayu.
[10] Monteiro, S.N., L.A.H. Terrones, J.R.M. D’Almeida. (2008). Mechanical performance of coir fiber/polyesterfcomposites. Polymer Testing 27 (2008) 591– 595.
[11] Saidah Andi, (2018), PengaruhfFraksi VolumefSerat Terhadap Kekuatan Mekanik KompositfSerat JeramifPadi Epoxy Dan Serat JeramifPadi Resin Yukalac 157 E-ISSN : 2622-5565 https://doi.org/10.21009/JKEM.5.2.7fJurnal Konversi Energi dan Manufaktur UNJ, Edisifterbit II –Oktoberl 2018
Downloads
Published
2022-08-18
How to Cite
Syarief, A., Hidayat, A. F., & Nugraha, A. (2022). PENGARUH FRAKSI VOLUME TERHADAP KUAT TEKAN DAN LENTUR KOMPOSIT BERPENGUAT SERBUK KAYU ULIN (Eusideroxylon Zwageri) BERMATRIK POLYESTER. ELEMEN : JURNAL TEKNIK MESIN, 8(2), 132–140. https://doi.org/10.34128/je.v8i2.168
Issue
Section
Author guidelines
