OPTIMIZATION OF 600 ML BOTTLES IN BLOW MOLDING MACHINE WITH RSM (RESPONSE SURFACE METHODOLOGY)
DOI:
https://doi.org/10.34128/je.v10i2.257Keywords:
Response Surface Methodology, Experimental Design, OptimizationAbstract
PT. TL Pasuruan is a company operating to produce bottled mineral water products. The type of product that is often produced is mineral water in 600 ml bottles using preform materials. The problem occurs when the material is replaced from type B to type A, the effect is that there are many defects caused by the temperature of the heater not matching the type of material used before. This research method is the Response Surface Methodology. The type of factorial design used is Box Behnken Design (BBD) with Minitab 21 software. The results obtained using Minitab software are 54 runs. The results of the study using the response surface method obtained the parameter settings for zone 1 = 164.7475℃, zone 2 = 137.8990℃, zone 3 = 74.4242℃, zone 4 = 76.8081℃, cycle time = 4.2485 (s) and blowing time = 1.250 (s). The product quality response variable is 0.6845 with a desirability of 1.000.
References
T. Gunawan and M. A. Ferdhian, “GREEN STRATEGY PERUSAHAAN PLASTIK DALAM MENGHADAPI REGULASI PEMERINTAH,” 2020. doi: https://doi.org/10.26593/jab.v16i1.3798.57-69.
M. Choirul Anwar, C. Budiyantoro, and T. Thoharudin, “Optimalisasi Parameter Proses Injeksi Menggunakan Simulasi Moldflow untuk Meminimalkan Cycle Time dan Eliminasi Short Shot pada Produk Tempat,” JMPM (Jurnal Material dan Proses Manufaktur), vol. 2, no. 1, pp. 56–57, 2018, doi: 10.18196/jmpm.2121.
M. B. Amirullah and D. Yudistiro, “PENGARUH PARAMETER BARREL TEMPERATURE, BLOWINGTIME DAN BLOWING PRESSURE TERHADAP VOLUME PRODUK BOTOL,” ELEMEN : JURNAL TEKNIK MESIN, vol. 6, no. 2, pp. 77–86, Dec. 2019, doi: 10.34128/je.v6i2.108.
M. sariski dwi Ellianto, E. Pramitaningrum, and M. Ikhwan, “PENENTUAN SETTING PARAMETER PEMBUATAN PRODUK JERIGEN 5 L PADA PROSES BLOW MOULDING DENGAN MENGGUNAKAN RESPONSE SURFACE METHODOLOGY,” ELEMEN : JURNAL TEKNIK MESIN, vol. 9, no. 1, pp. 57–63, Aug. 2022, doi: 10.34128/je.v9i1.191.
S. Nur Ikhsan, C. Budiyantoro, T. Suwanda, and A. Nugroho, “Perancangan Injection Blowing Tools dengan Line Slider untuk Mesin Blow Molding dengan Kapasitas Volume 300 Ml,” JMPM (Jurnal Material dan Proses Manufaktur), vol. 2, no. 1, 2018, doi: 10.18196/jmpm.2120.
M. Mas’ud, “OPTIMASI PROSES MESIN STRETCH BLOW MOULDING PADA BOTOL 600 ML DENGAN METODE RSM (RESPONSE SURFACE METHODOLOGY) STUDI KASUS DI PT. UNIPLASTINDO INTERBUANA,” 2017.
Mawardi Indra, Proses Manufaktur Plastik & Komposit. 2018.
Kana Tommy, “Kajian defect pada botol HDPE 180 ml produk yogurt heavenly dengan mesin extrusion blow SMC B11 di PT X,” 2021.
J. Fajrin and N. Marchelina, “Aplikasi Metode Eksperimen Response Surface Untuk Mengoptimalkan Kuat Tekan Bata Non-Bakar,” Jurnal Rekayasa Sipil, vol. 13, pp. 79–90, 2017, doi: 10.25077/jts.13.2.79-90.2017.
M. A. Octaviani, D. Retno, S. Dewi, and L. J. Asrini, “OPTIMASI FAKTOR YANG BERPENGARUH PADA KUALITAS LILIN DI UD.X DENGAN METODE RESPONSE SURFACE,” Jurnal Ilmiah Widya Teknik, vol. 16, 2017.
Myers Raymond, Response Surface Methodology, Fouth Edition. 2016.
K. Purnama Putra, D. Djumhariyanto, and R. K. Koekoeh W, “OPTIMASI PRODUKSI TUTUP BOTOL 500 ml PADA PROSES INJECTION MOULDING MENGGUNAKAN METODE RESPONSE SURFACE,” 2017.
M. A. Md Ali et al., “Fill Time Optimization Analysis In Flow Simulation Of Injection Molding Using Response Surface Method,” Malaysian Journal on Composites Science and Manufacturing, vol. 4, no. 1, pp. 28–39, Mar. 2021, doi: 10.37934/mjcsm.4.1.2839.
G. K. Pakem, K. B. Ginting, M. A. Kleden, and J. Matematika, “PENERAPAN METODE RESPON PERMUKAAN DALAM OPTIMALISASI LABA USAHA PERTANIAN TANAMAN KANGKUNG DARAT,” 2019.
M. Gibran, “OPTIMASI WAKTU SIKLUS PRODUKSI KEMASAN PRODUK 50 ML PADA PROSES BLOW MOULDING DENGAN METODE RESPON PERMUKAAN,” 2016.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
