PERANCANGAN DAN PENGEMBANGAN PRODUK CNC MINI 2 AXIS DENGAN METODE QUALITY FUNCTION DEPLOYMENT (QFD)
DOI:
https://doi.org/10.34128/je.v9i2.204Keywords:
Quality Function Deployment (QFD), Mini Lathe, DFM, DFA, RULAAbstract
Mini lathe is often used for several consumers to simplify lathe work with small workpiece size. There are several sizes of mini lathe on the market, so, it needed several developments. Quality Function Development (QFD) is a developing method from a product or service. This method was used because this method was able to give approach value to develop machine design to meet consumer desires and needs. This study discussed the development of mini lathe based on customer needs which was obtained from questionnaire. The questionnaire was processed inti development data and the basic of comparison design concepts. There were two comparing design concepts, Assessment based on function, ergonomic, design for manufacture, and design for assembly index. Based on assessment, concept number 2 is chosen as best concept.
References
E. Supriyanto, ““Manufaktur “Dalam Dunia Teknik Industri,” J. Ind. Elektro dan Penerbangan, vol. 3, no. 3, p. 1, 2013, [Online]. Available: https://jurnal.unnur.ac.id/index.php/indept/article/view/118.
A. Sutanto, A. Indra, and B. Yuliandra, “Pengembangan Desain Produk dengan Metoda QFD : Studi Kauss Desain Peralatan Pembuat Adonan Roti untuk Usaha Skala Kecil,” Proceeding Semin. Nas. Tah. Tek. Mesin XIV (SNTTM XIV), no. Oktober, pp. 7–8, 2015.
D. Djumhariyanto, “Pengembangan Alat Bantu Jalan (Walker) Dengan Metode Quality Function Deployment (QFD),” J. Flywheel, vol. 7, no. 1, pp. 35–44, 2016.
S. Andjar Sari, P. Vitasari, and S. L. A., “Pengembangan Desain Mesin Penghancur Kotoran Kambing Dengan Menggunakan Metode QFD,” J. Teknol. Dan Manaj. Ind., vol. 4, no. 2, pp. 29–34, 2018, doi: 10.36040/jtmi.v4i2.243.
A. Fathoni, S. Anwar, J. T. Mesin, U. P. Pengaraian, J. T. Tambusai, and P. Pengairan, “Perancangan Mini Forklip Manual Dengan Metode Dfma(Design for Manufacture and Assembly,” vol. 12, no. 2, pp. 114–120, 2020.
A. A. Arifin and H. S. Maulana, “Pengembangan Desain Lengan Support Jib Crane Dengan Menggunakan Analisa Metode Elemen Hingga,” Mek. J. Tek. Mesin, vol. 6, no. 1, pp. 5–8, 2020, [Online]. Available: http://jurnal.untag-sby.ac.id/index.php/MEKANIKA/article/view/4029.
E. Marliana and E. Santoso, “Analisa Pengaruh Perubahan Fasa Terhadap Konstanta Pada Coil Spring Shape Memory Alloy (Sma),” Elem. J. Tek. Mesin, vol. 7, no. 1, pp. 9–16, 2020.
P. Boothroyd, G. Dewhurst, Ed., Product Design for Manufacture and Assembly, Second. Marcel Dekker, Inc., 2002.
I. M. L. Batan, “Peran Design for Manufacture Pada Pengembangan Dan Inovasi Teknologi Terapan,” pp. 1–6, 2015.
G. Boothroyd, P. Dewhurst, and W. A. Knight, Product Design for Manufacture and Assembly. 2010.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.