DESAIN RANCANGAN GANTRY: DESAIN RANCANGAN GANTRY CNC ROUTER 3 AXIS DENGAN PENDEKATAN TOPOLOGY

M. Nushron Ali Mukhtar; Mochamad Andi Akrianto

doi:10.34128/je.v9i2.224

Authors

M. Nushron Ali Mukhtar Universitas Adi Buana Surabaya
Mochamad Andi Akrianto Universitas PGRI Adi Buana Surabaya

DOI:

https://doi.org/10.34128/je.v9i2.224

Keywords:

CNC Router 3 axis, Gantry, Metode elemen hingga, topology

Abstract

The 3 Axis Gantry CNC Router Design uses the finite element method as an essential step, bearing in mind that the shape displacement caused by the chisel movement must be as minimal as possible because it affects the quality of the craft. This study aims to optimize the gantry design of a three-axis CNC Router machine that is strong, light, and sturdy. This study uses the Finite Element Method with a topological approach to solving engineering problems. The results of the data analysis are in the form of von Mises, displacement, and safety factor values from the simulation of 10 kg, 20 kg, and 30 kg loading variations. Furthermore, optimization is carried out on the design of the gantry design using topological analysis to reduce the weight or mass of the gantry construction. The results of the modified gantry design are more optimal than the new and initial gantry designs, both from the effects of von Mises, displacement, and safety factors. In addition, the weight or mass of the modified gantry design is lighter by 1.8 kg.

References

M. Mansur, I. Yusuf, and M. Marzuki, “Rancang Bangun Mesin Cnc Drilling Menggunakan Sistem Kontrol Grbl Untuk Pembuatan Lubang Pcb,” J. Mesin Sains Terap., vol. 3, no. 2, pp. 58–63, 2019.

M. L. Apriadi, “PERANCANGAN MESIN CNC (COMPUTER NUMERICAL CONTROL) ROUTER DENGAN APLIKASI GRBL 0.9 CONTROL 3 AXIS SISTEM X, Y, DAN Z (HARDWARE).” POLITEKNIK NEGERI SRIWIJAYA, 2017.

D. W. Utama, “Perancangan Dan Analisis Rangka Mesin Desktop Cnc Milling,” POROS, vol. 16, no. 1, 2018.

A. Prasetyo, I. Malik, and A. Azharuddin, “ANALISIS VIBRASI FRAME CNC ROUTER 3 SUMBU SECARA NUMERIK,” AUSTENIT, vol. 12, no. 1, pp. 28–33, 2020.

M. N. A. Mukhtar et al., “ANALISIS SIMULASI PROSES IRONING UNTUK MENGETAHUI KETINGGIAN DINDING BERDASARKAN VARIASI REDUKSI KETEBALAN DINDING,” vol. 15.

L. A. N. Wibawa, “The fatigue life prediction of gantry crane with load capacity variation using Ansys Workbench,” Tek. J. Sains dan Teknol., vol. 16, no. 1, pp. 18–24, 2020.

M. Mukhtar, T. Koesdijati, S. Rochman, E. Nasrulloh, and L. Hidayat, “ANALISIS DESAIN STATOR GENERATOR TIPE MAGNET PERMANEN FLUKS AKSIAL MENGGUNAKAN METODE FINITE ELEMENT ANALYSIS (FEA),” J. Tek. Mesin, vol. 8, no. 2, pp. 149–156, 2021.

L. A. N. Wibawa and T. Tuswan, “Simulasi numerik kekuatan rak roket portabel menggunakan metode elemen hingga,” J. Tek. Mesin Indones., vol. 16, no. 2, pp. 54–59, 2021.

M. A. Rozik, “PERANCANGAN DAN ANALISIS KEKUATAN RANGKA MESIN PENGAYAK PASIR MENGGUNAKAN AUTODESK INVENTOR 2019.” Universitas 17 Agustus 1945 Surabaya, 2020.

R. D. W. I. ATMAJA, “PERBAIKAN STRUKTUR GANTRY MESIN CEDU CNC,” 2018.

DESAIN RANCANGAN GANTRY CNC ROUTER 3 AXIS DENGAN PENDEKATAN TOPOLOGY