DESIGN OF A PERMANENT MOLD FOR HIGH-VOLTAGE ELECTRICAL CLAMPING CONNECTOR
DOI:
https://doi.org/10.34128/je.v11i2.292Keywords:
Clamping connector, permanent mold, CADAbstract
This research focuses on the design of a clamping connector for high-voltage electrical systems using the permanent mold casting method. The design was developed using CAD/CAM software, with materials selected based on mechanical strength and temperature resistance. A prototype was created using CNC technology to ensure precision. The permanent mold design method was chosen to reduce production costs and improve efficiency without the need for welding processes. The results of the research indicate that this method produces clamping connectors that can be manufactured without the use of welding. The product design and permanent mold have been completed and are ready for production.
References
Ditjen Ketenagalistrikan Kemen ESDM, “Draft RUKN 2023-2060,” Kementeri. Energi dan Sumber Daya Mineral., 2023.
C. I. Cahyadi, K. Atmia, and A. Fitriani, “Analisis Pengaruh Rugi-Rugi Daya Pada Jaringan Transmisi 150 kV Menggunakan Software Etap 12.6,” Jambura J. Electr. Electron. Eng., vol. 4, no. 2, pp. 126–130, 2022, doi: 10.37905/jjeee.v4i2.13306.
G. Z. Ditroia, G., Ronald Lai, Kenneth Woo, “Connector Theory and Application,” A Guid. to Connect. Des. Specif. 4th Ed., 2018.
M. . Groover, Principles of Modern Manufacturing 5th Edition, 5th ed. NewJersey: John Wiley & Sons Pte. Ltd., 2013.
M. Iqbal, Y. Umardani, and A. Suprihanto, “Perancangan Desain Cetakan Injection Molding untuk Pembuatan Insole Sepatu Berbahan Silicon Rubber,” J. Tek. Mesin S-1, vol. 9, no. 3, pp. 407–416, 2021.
R. Manullang, S. Ulgari, B. Maruli, T. Pakpahan, and S. Artikel, “Investigasi dari Proses Parameter Die Casting pada Kualitas High Pressure Die Casting ADC 10 Alloys Parts,” Mech. Eng. Learn., vol. 9, no. 2, pp. 1–4, 2020.
U. Sukamto and M. F. B. Putra, “Pengaruh Suhu Tuang dan Cetakan Pengecoran Aluminiun Bekas Menggunakan Gravity Die Casting terhadap Kecacatan,” J. Metall. Eng. Process. Technol., vol. 2, no. 2, p. 21, 2022, doi: 10.31315/jmept.v2i2.6512.
M. W. B. N. Satria, “Desain Ulang Dan Analisis Elemen Hingga Pada Bolted Type Connector Untuk Listrik Tegangan TinggI,” Univ. Gajah Mada, 2020.
K. Budiyono, “Desain Ulang Dan Analisis Pada Komponen Jaringan Listrik Tegangan Tinggi Bolted Parallel Groove Clamp Connector.” Universitas Tidar, 2022.
A. H. S. Faza, “Desain Ulang Dan Analisis Straight Connector Pada Jaringan Listrik Tegangan Tinggi,” Univ. Tidar, 2022.
B. S. Wijanarka, CADCAM untuk Mesin Bubut dan Frais CNC Menggunakan Mastercam 9 dan X3. 2013.
D. D. Wijaya, H. Budiman, A. L. Belakang, and B. Tujuan, “Analisa Proses Pengecoran Fcd 450 Dengan Metode Cetakan Pasir Kering ( Dry-Sand Molds ) Pada Produk Sprocket,” Pros. Ind. Res. Work. Natl. Semin., vol. 10, no. 0233, pp. 36–40, 2020, [Online]. Available: https://jurnal.polban.ac.id/ojs-3.1.2/proceeding/article/view/1368
H. A. S. P. Pamungkas, “Analisa struktur mikro besi cor kelabu hasil cetakan permanen,” Univ. Muhammadiyah Surakarta, 2019.
Z. A. Abid, H. Syamsuri, and A. Herdiana, “Perancangan Sistem Insinerator Sampah Plastik Layak Bakar Ramah Lingkungan Di Kampus Unigal Ciamis,” J. Ilm. Teknol. Infomasi Terap., vol. 9, no. 2, pp. 265–268, 2023, doi: 10.33197/jitter.vol9.iss2.2023.1041.
B. Burhanudin, E. Suryono, A. Prasetyo, B. Margono, Z. Zainuddin, and A. Rahmatulloh, “Pengembangan Pola Pembelajaran Pemograman Cnc Melalui Integrasi G Code, Simulator Cnc Dan Cam,” Abdi Masya, vol. 4, no. 2, pp. 219–224, 2023, doi: 10.52561/abma.v4i2.310.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
