CASTING PATTERN DESIGN OF CLAMPING CONNECTOR FOR HIGH VOLTAGE ELECTRICITY
DOI:
https://doi.org/10.34128/je.v11i2.290Keywords:
Casting pattern, Sand casting, Clamping connectorAbstract
The development of casting patterns for clamping connectors in high-voltage electrical applications is the focus of this research. It aims to design products and patterns, produce prototypes, and test the casting process using sand casting techniques. The research methods include a literature review, CAD design, CNC prototype creation, and casting evaluation. Results show that the designed patterns were successfully implemented in the casting process. Tests indicate that the final product meets design specifications and functions well. Although mechanical durability measures like tensile or compressive strength are not included in this study, casting results have been evaluated for shape accuracy, surface quality, and pattern completeness. Further mechanical strength testing is suggested for future research.
References
L. G. Gerald, Connectors and Interconnections Handbook. Camden, NJ: Electronic Connector Study Group, Inc., 1977.
G. Ditroia, R. Lai, K. Woo, and G. Zahlman, Connector Theory and Application, 5th ed. Manchester: Burndy LLC, 2018.
L. Y. Pratama, R. Gianto, and M. I. Arsyad, “Analisa Perbandingan Konduktor ACSR dan ACCC Saluran Transmisi Tegangan Tinggi 150 Kv Pada Sistem Khatulistiwa,” J. Tek. Elektro Univ. Tanjungpura, vol. 10, pp. 1–9, 2022, [Online]. Available: https://jurnal.untan.ac.id/index.php/jteuntan/article/view/55592%0Ahttps://jurnal.untan.ac.id/index.php/jteuntan/article/download/55592/75676593523
M. W. B. Satria, “Desain Ulang dan Analisis Elemen Hingga Pada Bolted Type Connector Untuk Listrik Tegangan Tinggi,” Universitas Gadjah Mada, 2020. doi: 10.02.
T. Surdia and K. Chijiwa, Teknik Pengecoran Logam. Jakarta: PT Pranadya Paramita, 1987.
H. Sudjana, Teknik Pengecoran Logam Jilid 2. Jakarta: Direktorat Pembinaan Sekolah Menengah Kejuruan, 2008.
K. Budiyono, “Desain Ulang dan Analisis Pada Komponen Jaringan Listrik Tegangan Tinggi Bolted Parallel Groove Clamp Connector,” Universitas Tidar, 2022.
A. H. S. Faza, “Desain Ulang dan Analisis Straight Connector Pada Jaringan Listrik Tegangan Tinggi,” Universitas Tidar, 2022.
S. Khoiriah, “Desain Dan Analisis Kekuatan Pada Ladder Frame Chassis Kendaraan Hybrid Elektrik- Pneumatik Menggunakan Software Autodesk Inventor Professional 2017,” Desain Dan Anal. Kekuatan Pada Ladder Fram. Chass. Kendaraan Hybrid Elektr. Menggunakan Softw. Autodesk Invent. Prof. 2017, 2020.
A. A. Kahar, “Desain Pola Untuk Pengecoran Flange Aluminium (Al) Dengan Media Cetakan Pasir Co₂,” Universitas Muhammadiyah Surakarta, 2018.
E. Prianto, M.Eng, “Proses Permesinan Cnc Dalam Pembelajaran Simulasi Cnc,” J. Edukasi Elektro, vol. 1, no. 1, pp. 62–68, 2017, doi: 10.21831/jee.v1i1.15110.
B. Prayoga, “Rancang Bangun Dan Analisa Simulasi Sistem Saluran Terhadap Cacat Penyusutan (Shrinkage) Pada Pembuatan Kepala Silinder (Cylinder Head) Sinjai (Mesin Jawa Timur) 650 Cc Material Alumunium Adc 12 Dengan Pengecoran Pasir (Sand Casting),” J. Tek. Mesin, p. 163, 2015.
A. R. Sadewo, Pengaruh Variasi Posisi Pola Terhadap Cacat Coran, Struktur Mikro, dan Kekerasan dari Hasil Coran Pembuatan Produk Tutup Motor Listrik dengan Metode Cetakan Pasir (Sand Casting). 2019.
M. Y. T. Wibowo, Perancangan Frame Sepeda Lipat Dan Pembuatan Pola Untuk Metode Sand Casting. 2024.
N. A. R. Pane and A. Sudiyanto, “Proses Pengecoran Dan Manufaktur Logam,” J. Metall. Eng. Process. Technol., vol. 1, no. 2, pp. 123–130, 2021.
A. A. Putra, M. Syahid, and A. A. Mochtar, “Calculation and Simulation of Aluminium Alloy Flange Reducer Cast Using Resin Sand Mold,” EPI Int. J. Eng., vol. 4, no. 2, pp. 109–114, 2021, doi: 10.25042/epi-ije.082021.01.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
