CASTING OF PERMANENT MOLD MATERIAL FOR PROSTITUTE FOOT SOLES
DOI:
https://doi.org/10.34128/je.v12i1.301Keywords:
Mold prosthetic feet, sand casting, casting patternAbstract
Molds of prosthetic feet can be made using aluminum materials by the metal casting method. This research aims to create a pattern design of molding materials for prosthetic feet that can reduce the use of the amount of material and time efficiency in making casting patterns. The creation of pattern design relies on the use of CAD software which is used as a reference for making prototypes to be produced through a machining process with the use of CAM technology on CNC machines to ensure the desired level of precision in sand casting trials. The results of this study show that the pattern prototype of the prosthetic sole molding material can meet the design specifications with a high degree of precision and function as an effective molding material.
References
[1] Kemenkes RI. “Profil Kesehatan Indonesia 2021”. Jakarta: Kementrian Kesehatan Republik Indonesia. 2022.
[2] A. D. Junianto and D. Kuswanto, “Desain Kaki Palsu untuk Membantu Aktivitas Berjalan pada Tuna Daksa Transtibial dengan Menggunakan Rapid Prototyping dan Reverse Engineering,” Jurnal Sains dan Seni ITS, vol. 7, no. 1, doi: 10.12962/j23373520.v7i1.29934. Mar. 2018.
[3] C. P. Wardoyo, Design Manufacture And Evaluation Of Single Axis Type Of Right Foot Prosthesis. 2023.
[4] D. Pratika, A. Hafizh Ainur Rasyid, and J. Teknik Mesin, “Perbandingan Metode Sand Casting Dengan Metode Centrifugal Casting Terhadap Kekuatan Bending dan Porositas Paduan Aluminium Silikon”. Jurnal Teknik Mesin. Vol.9 No.1: 65-70. 2021.
[5] Pratama M. dan Soeharto, “Studi Eksperimen Pengaruh Jenis Saluran pada Aluminium Sand Casting terhadap,” JURNAL TEKNIK ITS, vol. 1, pp. 2301–9271, 2012.
[6] S. P. Yudha, “Pengaruh Penggunaan Pasir Balikpapan Terhadap Kekerasan dan Fluiditas Logam Coran Paduan Al-Si,” Otopro, vol. 16, no. 2, p. 34, doi: 10.26740/otopro.v16n2.p34-38. Mei 2021.
[7] H. Syamsuri and Z. Abidin, “Perancangan Sistem Insinerator Sampah Plastik Layak Bakar Ramah Lingkungan di Kampus UNIGAL Ciamis,” Ade Herdiana JITTER, 2023.
[8] B. Burhanudin, E. Suryono, A. Prasetyo, B. Margono, Z. Zainuddin, and A. Rahmatulloh, “Pengembangan Pola Pembelajaran Pemograman CNC Melalui Integrasi G Code, Simulator CNC dan CAM,” Abdi Masya, vol. 4, no. 2, pp. 219–224, Nov. doi: 10.52561/abma.v4i2.310. 2023.
[9] D. Dani Wijaya and H. Budiman, “Analisa Proses Pengecoran Fcd 450 Dengan Metode Cetakan Pasir Kering (Dry-Sand Molds) Pada Produk Sprocket.”
[10] N. A. R. Pane and A. Sudiyanto, “Proses Pengecoran dan Manufaktur Logam,” J. Metall. Eng. Process. Technol., vol. 1, no. 2, pp. 123–130, 2021.
[11] A. Sudiyanto dan N.A. Shiddiq, “Proses Pengecoran Logam dan Analisa Cacat Pada Produk B3x6". J. Metall. Eng. Process. Technol., vol.1, no.1. https://doi.org/10.31315/jmept.v1i1.5010. Agust. 2022.
[12] H. Sudjana. TEKNIK PENGECORAN JILID 2 SMK. Jakarta: Direktorat Pembinaan Sekolah Menengah Kejuruan. 2008.
[13] M. Y. T. Wibowo, Perancangan Frame Sepeda Lipat Dan Pembuatan Pola Untuk Metode Sand Casting. 2024.
[14] W. T. Bhirawa, “Proses Pengecoran Logam Dengan Menggunakan Sand Casting.” Jurnal Teknik Industri. Vol.4 No.1: 31-41. 2021.
[15] A. A. Putra, M. Syahid, and A. A. Mochtar, “Calculation and Simulation of Aluminium Alloy Flange Reducer Cast Using Resin Sand Mold,” EPI International Journal of Engineering, vol. 4, no. 2, pp. 109–114, doi: 10.25042/epi-ije.082021.01. Aug. 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
