STATIC ANALYSIS OF BRACKET ROLL BRUSH TENSOR MACHINE USING THE FEA METHOD

Authors

  • Yunnanta Adi Putra Universitas PGRI Adi Buana Surabaya
  • M. Nushron Ali Mukhtar Universitas PGRI Adi Buana Surabaya

DOI:

https://doi.org/10.34128/je.v10i1.246

Keywords:

Bracket Roll Brush, Aluminium 6061 T6, FEA Method, Static Analysis

Abstract

This research uses the finite element analysis method to examine the design and safety analysis of the bracket roll brush. The problem occurs when the bracket roll brush is deformed during the wetting process, which impacts the printout of the product, where the ink dirt is still attached. The bracket roll brush uses 6061 T6 aluminum material of 38 mm x 25 mm x 19 mm, and the weight generated from mass properties is ± 0.03 Kg. The loading variable on the bracket roll brush is 147 N, 172 N, and 196 N. The simulation results show that the bracket roll brush has a maximum stress value of 85.551 N/mm2, and the value at the maximum stress of the bracket roll brush is still below the material yield strength value of 275,000 N/mm2. The simulation results on the bracket roll brush have a maximum displacement value of 0.0035 mm. And the simulation results on the bracket roll brush have a minimum safety factor value of 3.214.

References

H. Zone and U. M. Gresik, “( Finite Element Analysis ) By : Hidayat S . T ., M . Eng,” no. June, 2020.

H. P. R. Pribadi and I. Hidayat, “Analisis Beban Statik Winglet N-219,” J. Ind. Elektro dan Penerbangan, vol. 6, no. 2, pp. 42–49, 2016.

E. Prasetyo, R. Hermawan, M. Naufal, I. Ridho, and I. I. Hajar, “Analisis Kekuatan Rangka pada Mesin Transverse Ducting Flange ( TDF ) Menggunakan Software Solid Works,” vol. 13, no. 3, pp. 299–306, 2020.

E. DISWANDORO, “DESAIN BRACKET BODY ALAT UKUR TEKANAN FILTER BAHAN BAKAR PADA MESIN TIPE J08E DENGAN FINITE ELEMENT ANALYSIS.” Universitas Mercu Buana, 2020.

M. I. Jazuli, “ANALISA KEKUATAN V-BRACKET SEBAGAI PENYANGGA AS PROPELLER PADA KAPAL KONTAINER KENDHAGA NUSANTARA 6.” Politeknik Perkapalan Negeri Surabaya, 2018.

M. N. A. Mukhtar and M. A. Akrianto, “DESAIN RANCANGAN GANTRY CNC ROUTER 3 AXIS DENGAN PENDEKATAN TOPOLOGY,” J. Tek. Mesin, vol. 9, no. 2, pp. 131–139, 2022.

V. Dobrovolsku, K. Z. (1978). Machine element : textbook. Moscow : Peace Publiser.

M. N. A. Mukhtar, T. Koesdijati, S. Rochman, E. Nasrulloh, and L. Hidayat, “Analisis Desain Stator Generator Tipe Magnet Permanen Fluks Aksial Menggunakan Metode Finite Element Analysis (FEA),” Elem. J. Tek. MESIN, vol. 8, no. 2, pp. 149–156, 2021.

Fauzi, Helmi. (2013). Analisis Tegangan Pada Frame Mobil Listrik Sinosi Menggunakan Metode Elemen Hingga.

R. K. N. Suprapto and L. A. N. Wibawa, “Desain dan Analisis Tegangan Rangka Alat Simulasi Pergerakan Kendali Terbang Menggunakan Metode Elemen Hingga,” J. Tek. Mesin ITI, vol. 5, no. 1, p. 19, 2021, doi: 10.31543/jtm.v5i1.559.

I. Roswandi and R. Rahmat, “Analisis Beban pada Hook Pembalik Produk AEET dengan Software Solidwork 2018,” PRIMA-Aplikasi dan Rekayasa dalam Bid. Iptek Nukl., vol. 17, no. 1, pp. 10–18, 2020.

Published

2023-06-28

How to Cite

Putra, Y. A., & Mukhtar, M. N. A. . (2023). STATIC ANALYSIS OF BRACKET ROLL BRUSH TENSOR MACHINE USING THE FEA METHOD. ELEMEN : JURNAL TEKNIK MESIN, 10(1), 57–63. https://doi.org/10.34128/je.v10i1.246

Issue

Section

Articles

Similar Articles

1 2 3 4 5 6 7 > >> 

You may also start an advanced similarity search for this article.