DESIGN OF COCONUT SPLITTER TOOL USING TWO BLADES

Authors

  • Zainuddin Politeknik Negeri Bandung
  • Ilham Azmy Program Studi Teknik Mesin, Politeknik Negeri Bandung
  • Muhammad Iqbal Fhaisol Program Studi Teknik Mesin, Politeknik Negeri Bandung
  • Petrus Londa Program Studi Teknik Mesin, Politeknik Negeri Bandung

DOI:

https://doi.org/10.34128/je.v11i1.272

Keywords:

Design, Splitter tool, Coconut

Abstract

Coconut is massively consumed by people due to its high nutrition. The coconut splitting process usually conventionally performed by empty-handed which tends to high time-consumed and less safety. In this work, coconut splitter was successfully designed by involving tool concept planning, part elements designation, and tool assembly. Tool concept planning consists of design formulation, calculation and selection of machine elements such as frame, splitting cutter, belt, pulley, shaft, and prime motor. The design process was carried out by using computer-aided design Solidworks. The design result has dimension of 860x760x700 mm with two cutters feature using circular saw and wheel which inserted to transmission system V-belt and pulley driven by motor of 2,6 kW with velocity of 332 rpm to achieve 600 pieces coconut splitting per hour. The design of coconut splitter is highly expected to enhance productivity and safety while coconut splitting process.

References

S. Nattadurai, G. Sengottiyan, S. Saravanan, S. K. Anandaramn, R. Rajagopal, and B. Venkatachalam, "Design of Semi Automatic Coconut Dehusker for Small Scale Farmers," International Journal of Innovative Technology and Exploring Engineering, vol. 9, no. 5, pp. 848-852, 2020.

V. A. Naliapara, V. M. Sejani, and N. U. Joshi, "Design of dry coconut dehusking and deshelling machine components using solidworks simulation," Journal of Applied Horticulture, vol. 25, no. 1, pp. 104-109, 2023.

P. I. Gultom and P. Tamara, "Perancangan Mesin Pengupas Kedelai dengan Metode Wet Process Skala Home Industry," Industri Inovatif: Jurnal Teknik Industri, vol. 11, no. 2, pp. 66-70, 2021.

A. S. Saleh, Y. Wibisono, and Z. Abidin, "Uji Unjuk Kerja Mesin Pembelah dan Pemeras Jeruk Manis (Citrus x sinensis)," Jurnal Agroteknologi, vol. 15, no. 02, pp. 106-113, 2021.

Rodika, Tuparjono, B. Otomo, and R. A. Febryani, "Rancangan Mesin Pembelah Buah Pinang dengan Dua Mata Potong," Jurnal Manutech, vol. 10, no. 02, pp. 59-63, 2018.

B. Sulaksono and K. Yani, "Perancangan Konsep Mesin Mixer dan Press Serbuk Kayu yang Portable untuk Pembuatan Papan Partikel dengan Metode VDI 2221," Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, vol. 12, no. 2, pp. 134-138, 2022.

Suharto, Z. Abidin, and A. Pangestu, "Rancang Bangun Mesin Wet Hulling Kopi dengan Penggerak Motor Diesel 30 HP," Jurnal Teknik Mesin Elemen, vol. 7, no. 2, pp. 108-114, 2020.

B. Umroh, Darianto;, and R. S. Sipangkar, "Analisa Kinerja Mata Pisau Mesin Pengiris Kulit Kelapa Muda," JMEMME (Journal of Mechanical Engineering, Manufactures, Materials and Energy), vol. 3, no. 01, pp. 29-38, 2019.

Sukadi and A. Kurniawan, "Rancang Bangun Mesin Pembelah Pinang," TEKNIKA: Jurnal Teknik, vol. 7, no. 2, pp. 168-174, 2020.

H. Susanto and Safrizal, "Rancang Bangun Alat Bantu Pembelah Buah Durian," Jurnal Mekanova, vol. 4, no. 2, pp. 110-116, 2018.

Erwanto, H. Taufiq, L. Nidia, and W. Joko, "Perancangan Blanking Compound Dies pada Mesin Press Sinao Kapasitas 250 kN untuk Proses Pembuatan Ring M20," QUANTUM TEKNIKA, vol. 3, no. 1, pp. 39-44, 2021.

Mukhnizar and R. O. Hidayat, "Perencanaan Mesin Serut Bambu Kapasitas 500 Batang/Jam," Journal of Scientech Research and Development, vol. 4, no. 2, pp. 159-170, 2022.

F. Alqodri, R. Sumiati, Rakiman, Y. Yetri, and D. Leni, "Modifikasi Mesin Pengupas Kulit Pinang Kering," Jurnal Teknik Mesin, vol. 14, no. 2, pp. 59-63, 2021.

I. Putri and P. Zainal, "Rancang Bangun Mesin Pembelah Buah Pinang (Areca cathecu L.) dengan Sumber Penggerak Motor Listrik," Jurnal Teknologi Pertanian Andalas, vol. 25, no. 2, pp. 163-174, 2021.

Suryanto, Suharto, V. S. Tripriyo, H. Iwan, and S. Agus, "Rancang Bangun Alat Belah Bambu Dengan Pemutar Ulir Penekan Multi Pisau," Jurnal Rekayasa Mesin, vol. 9, no. 2, pp. 57-62, 2014.

Published

2024-06-28

How to Cite

Zainuddin, Azmy, I., Fhaisol, M. I., & Londa, P. (2024). DESIGN OF COCONUT SPLITTER TOOL USING TWO BLADES. ELEMEN : JURNAL TEKNIK MESIN, 11(1), 1–7. https://doi.org/10.34128/je.v11i1.272

Issue

Section

Author guidelines

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.