DESIGN OF A TWO-MESH SAND SIEVE FOR MATERIAL SEPARATION
Keywords:
pengayak pasir, eksentris, meshAbstract
Sand is a widely used building material, used from the structure's bottom to the top of the building. Good as a dune mix or a concrete mixture. The high demand for residential buildings or shops that require sand as a raw material increases the need for supporting equipment to maximize processing time; one necessary supporting tool is the sand sowing machine. This machine uses 3 (three) levels, which are on the first level to filter gravel, the second level for fine sand between 12-30 mesh, third level for residual in the form of dust sand. In the design of this sieving machine, there is also an eccentric shaft that serves to regulate the forward and backwards movement so that the sifting process can take place. The engine is planned to use a 0.5 kW motor with a rotation of 1500 rpm, while the engine rotation is designed for 300 rpm to sieve the sand with a capacity of 1 m³/minute.
References
[1] Muchlisinalahuddin, A. Ihsan, and M. Suslam K, “Analisa Kekuatan Rangka Pada Desain Mesin Pengayak Pasir Rotari Kapasitas 10 Kg Menggunakan Simulasi Solidwork,” Jurnal Ilmiah Poli Rekayasa, vol. 20, pp. 95–100, 2025.
[2] S. Hernawan, M. Pratama R., and P. Alziqri, “Rancang Bangun Mesin Pengayak Pasir Sistem,” Politeknik Manufaktur Negeri Bangka Belitung, pp. 1–52, 2025.
[3] C. Harsito, A. M. Nur, A. Prasetyo, T. Triyono, R. A. Rachmanto, and B. Santoso, “Penerapan Teknologi Tepat Guna Sebagai Peningkatan Kapasitas Mesin Pengayak Pasir Tipe Rotary Dan Usaha Dusun Tanggalan, Kabupaten Karanganyar,” Jurnal Kewirausahaan dan Bisnis, vol. 26, no. 1, pp. 1–12, Jun. 2021, doi: 10.20961/jkb.v26i1.44734.
[4] Romiyadi, W. Sinta Mustika, and I. Purnama Putri, “Perancangan dan Pembuatan Mesin Pengayak Pasir Tipe Rotary Kapasitas 30 m³/jam,” Jurnal Sains dan Ilmu Terapan, vol. 4, no. 2, pp. 12–16, 2021.
[5] A. Wijianto and W. Wardana, “Rancang Bangun Mesin Pengayak Pasir Sistem Rotary Dengan Tiga Grade Hasil Ayakan,” Quantum Teknika : Jurnal Teknik Mesin Terapan, vol. 4, no. 2, pp. 90–96, Jun. 2023, doi: 10.18196/jqt.v4i2.16155.
[6] D. Aprilman, M. Arpan, and M. H. Fadhilan, “Rancang Bangun Mesin Pengayak Pasir Otomatis Menggunakan Motor Bensin 6.5 Hp,” Jurnal Teknik Mesin, vol. 7, pp. 11–26, 2021.
[7] M. Fauzan Apriandandy, R. H. Saputra, B. Setiawan, and S. Yulianto, “Perancangan Mekanisme Penggerak Pada Mesin Pengayak Pasir Dengan Alat Pengangkut Belt Conveyor,” Prosiding Seminar Nasional Penelitian LPPM UMJ, pp. 2–11, 2023, [Online]. Available: http://jurnal.umj.ac.id/index.php/semnaslit
[8] N. Sonelma and K. Wijayanto, “Rancang Bangun Mesin Pengayak Mekanis untuk Pengujian di Laboratorium,” Seminar Nasional Inovasi Vokasi, Vol. 3, pp. 227–232, 2024.
[9] A. Ihsan, “Analisa Kekuatan Rangka Pada Desain Mesin Pengayak Pasir Rotari Kapasitas 10 kg Menggunakan Simulasi SolidWorks Strength Analysis Of Frame In The Design Of Rotary Sand Sieving Machine With 10 kg Capacity Using Solidworks Simulation,” Jurnal Ilmiah Poli Rekayasa, vol. 20, 2024.
[10] N. Allo M and S. Buyung, “LPPM Politeknik Saint Paul Sorong 8 Program Studi Diploma IV Teknik Mesin Politeknik Saint Paul Sorong,” Jurnal Voering, vol. 6, pp. 8–19, 2021.
[11] A. Haryono, G. Rubiono, and I. Qiram, “Pengaruh Sudut Kemiringan Ayakan Getar (Vibrating Screen) Terhadap Unjuk Kerja Ayakan,” Jurnal V-Mac, vol. 5, pp. 13–16, 2020.
[12] R. Napitupulu, S. Hernawan, M. Rio Pratama, and P. Alziqri, “Prosiding Seminar Nasional Inovasi Teknologi Terapan,” Prosiding Seminar Nasional Inovasi Teknologi Terapan, pp. 2–6, 2025.
[13] Fahruddin, “Perencanaan Konstruksi Rangka Mesin Pengayak Pasir,” Jurnal Teknik Mesin Politeknik Raflesia, pp. 24–37, 2021.
[14] A. Sateria, E. Yudo, Sugiyarto, R. Melati, B. Saputra E, and I. Naufal, “Rancang Bangun Mesin Pengayak Pasir untuk Meningkatkan Produktivitas Pengayakan Pasir Pada Pekerja Bangunan,” Jurnal Teknologi Manufaktur, vol. 11, pp. 9–13, 2019.
[15] I. Al Fajri and M. Iqbal Harapan Muslim Siregar, “Perencanaan Mesin Pengayak Pasir Pada Proses Penghalusan Pasir Sistem Motor Listrik,” jurnal Lminar, vol. 5, pp. 44–57, 2023.
[16] A. Salam, S. Sahriana, A. M. N. Hidayat, I. Salam, and D. M. Firmansyah, “Rancangan Mesin Pengayak Bahan Media Tanam Jamur Tiram,” Prosiding 6th Seminar Nasional Penelitian & Pengabdian Kepada Masyarakat, pp. 495–500, 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
