DESIGN OF A MULTIFUNCTIONAL POTATO CUTTING MACHINE
DOI:
https://doi.org/10.34128/je.v12i2.334Keywords:
Kentang, French fries, Desain perancangan, PemotongAbstract
We often encounter potatoes in traditional and modern markets. Potatoes are very easy to process into various kinds of food, one of which is French fries. For this reason, this research has produced a multifunctional potato cutting machine design that is time efficient, fast in cutting potatoes, and is also a portable machine. The results of this multifunctional potato cutting machine design resulted in the design of machine components such as a potato funnel hopper with dimensions of 300 mm x 80 mm x 222 mm, a potato pusher with dimensions of 80 mm x 114 mm, and the main frame of the machine with dimensions of 421 mm x 300 mm x 380 mm. Then there are 3 variants of cutting knives consisting of flat, long/stick and soft cutting knives. Apart from that, the knife driver used is an electric motor and other drive transmission. Overall, the results of this design produce a design drawing for a potato cutting machine with dimensions of 421 mm x 300 mm x 544 mm.
References
I. Ismadi, K. Annisa, L. Nazirah, N. Nilahayati, and M. Maisura, “Karakterisasi Morfologi Dan Hasil Tanaman Kentang Varietas Granola Dan Kentang Merah Yang Dibudidayakan Di Bener Meriah Provinsi Aceh,” J. Agrium, vol. 18, no. 1, pp. 63–71, doi: 10.29103/agrium.v18i1.3844, 2021.
E. Irwan, S. Wijianti, Y. Setiawan, D. Balunijuk, K. Merawang, and K. Bangka, “Rancang Bangun Mesin Pemotong Kentang Berbentuk Stick,” J. Tek. Mesin, vol. 7, no. 1, 2021.
N. Waluyo Utomo and A. Mahendra Sakti, “Mesin Pengupas Dan Pemotong Kentang Semi Otomatis Analisis Mesin Pengupas Dan Pemotong Kentang Semi Otomatis.”, 2015.
K. T. Hendro Sefteven Hutahea, Dendi Rivan Girsang, Enzo W.B Siahaan, “Rancang Bangun Mesin Pengupas Dan Pemotong Kentang Stik Dengan Kapasitas 3 Kg/Proses Semi Otomatis,” 2022.
N. Rezky Alfino, “JTEV (JURNAL TEKNIK ELEKTRO DAN VOKASIONAL) Rancang Bangun Alat Pemotong Kentang Berbentuk Stick Berbasis Mikrokontroller ATMega 328”, [Online]. Available: http://ejournal.unp.ac.id/index.php/jtev/index, 2020.
R. Nur, A. Kurniawan, D. Romahadi, and M. Fitri, “Implementasi Metode Elemen Hingga Menggunakan Solidworks untuk Mengoptimalkan Desain Pelek Depan Sepeda Motor Tipe Casting Wheel,” J. Tek. Mesin, vol. 12, no. 2, p. 96, 2023.
L. Siregar, R. Silaen, and J. L. Hutabarat, “Pengaruh Perubahan Beban Terhadap Putaran dan Daya Masuk Motor Induksi Tiga Fasa (Aplikasi Pada Laboratorium Konversi Energi Listrik FT-UHN),” J. ELPOTECS, vol. 4, no. 1, pp. 1–15, doi: 10.51622/elpotecs.v4i1.446, 2021.
E. S. Johannes Fikki Fernando Damanik, Riris Debora Hutasoit, Lampita Deniska Sitorus, “Jurnal Ilmiah Wahana Pendidikan,” J. Ilm. Wahana Pendidik. https//jurnal.unibrah.ac.id/index.php/JIWP, vol. 8, no. 3, pp. 178–183, doi: 10.5281/zenodo.6604957, 2022.
H. Mahmudi, “Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi Mesin Pencacah,” J. Mesin Nusant., vol. 4, no. 1, pp. 40–46, doi: 10.29407/jmn.v4i1.16201, 2021.
H. Istiqlaliyah, “Perancangan Rangka Mesin Pembuat Keripik Umbi Dengan Aplikasi Sistem Pneumatik,” J. Mesin Nusant., vol. 3, no. 2, pp. 112–121, doi: 10.29407/jmn.v3i2.15575, 2021.
S. Gumilar et al., “Analisis Laju Aliran Dan Kekuatan Magnetic Trap Pada Hopper Mesin,” J. Tek. Mesin, vol. 11, no. 1, pp. 48–55, 2023.
B. A. J. V. Oscar Andrian Yohanes, “Vol 5, 2023,” IMDeC, vol. 5, no. Automatic French Fries Cutter, p. 5, 2023.
Wibowo Dedi Setyo, “Analisa Efisiensi dan Kinerja Motor Listrik 3 Fasa Sebagai Pompa Penyaluran Bahan Bakar Minyak Pertamina Patra Niaga,” 2022.
N. E. dan H. Hibatullah, Dimas, Muhammad Iqbal, “Mesin Pemotong Kentang,” Pros. Semin. Nas. Tek. Mesin Politek. Negeri Jakarta, no. ANALISA PERHITUNGAN RANCANG SIMULASI MESIN PEMOTONG KENTANG, pp. 922–931, [Online]. Available: https://www.maksindo.com/mesin-pemotong-kentang-2, 2021.
R. F. A. WILDAN, “Perencanaan Dan Perhitungan Transmisi Pada Mesin Pengaduk Tipe Horizontal Berkapasitas 60 Kg/Jam,” Tugas Akhir-TM095502, 2016.
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
