COMPARATIVE STUDY OF THE EFFECT OF NITROCARBURIZING ON MECHANICAL AND PHYSICAL PROPERTIES OF LOW CARBON STEEL
DOI:
https://doi.org/10.34128/je.v11i2.282Keywords:
Nitrocarburizing, SS400, ASTM A36, perlakuan panasAbstract
The increasingly widespread use of structural steel in everyday life, despite its tendency to undergo corrosion, results in financial losses and poses safety risks if damage occurs. This study aims to analyze the effects of nitrocarburizing on the hardness, corrosion rate, microstructure, and composition of low-carbon materials SS400 and ASTM A36. The research method used is experimental. Data analysis techniques were obtained by comparing the results of each test. The nitrocarburizing test results showed differences in hardness values and corrosion rates for SS400 and ASTM A36. The SS400 test results at 350°C were 221.04 VHN and 0.26993 mpy, at 400°C were 278.85 VHN and 0.30959 mpy, and at 450°C were 440.39 VHN and 1.4548 mpy. The ASTM A36 test results at 350°C were 377.43 VHN and 0.43071 mpy, at 400°C were 399.58 VHN and 0.085371 mpy, and at 450°C were 230.83 VHN and 1.4336 mpy.
References
M. Rahmadhani, “Analisa Uji Nitrocarburizing Pada Temperatur 750℃, 850℃, 950℃ Terhadap Pengaruh Kekerasan Dan Struktur Mikro Pada Baja Aisi 1020 Dengan Media Pendingin Menggunakan Metode Taguchi,” 2022.
E. Iryanto and Sriyanto, “Pengaruh Nitrocarburizing Terhadap Kekerasan Dan Laju Korosi Pada Baja Tahan Karat Aisi 410,” JURNAL TEKNIKA, vol. 8, no. 1, pp. 17–24, 2023.
F. Al Afghani, E. Hermawan, and S. Shaleha, “Efek Nitrocarburizing Pada Material Low Carbon Steel Terhadap Ketahanan Korosi Dan Kekerasan,” Urania : Jurnal Ilmiah Daur Bahan Bakar Nuklir, vol. 28, no. 1, p. 11, Feb. 2022, doi: 10.17146/urania.2022.28.1.6596.
S. Nengsih, “Perbandingan Kedalaman Pengikisan Logam Dalam Larutan Feri Klorida,” CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro, vol. 5, no. 1, p. 75, Feb. 2021, doi: 10.22373/crc.v5i1.8472.
G. Priyotomo, “Deteksi Proses Korosi Pada Baja Dengan Menggunakan Lapisan Akrilik Termodifikasi Phenolphthalein,” Jurnal Teknik Mesin Cakram, vol. 3, no. 2, p. 55, Oct. 2020, doi: 10.32493/jtc.v3i2.7518.
P. Pedeferri, “Engineering Materials Corrosion Science and Engineering Edited by Luciano Lazzari and MariaPia Pedeferri,” Milan, Jun. 2018. [Online]. Available: http://www.springer.com/series/4288
W. Handoko, F. Pahlevani, and V. Sahajwalla, “Enhancing corrosion resistance and hardness properties of carbon steel through modification of microstructure,” Materials, vol. 11, no. 12, Nov. 2018, doi: 10.3390/ma11122404.
M. Iqbal, “Pengaruh Temperatur Terhadap Sifat Mekanis Pada Proses Pengkarbonan Padat Baja Karbon Rendah,” 2020.
A. Wahyu et al., “SPECTA Journal of Technology Analisis Pengaruh Variasi Temperatur Proses Pack Carburizing Terhadap Laju Korosi Material Baja Karbon ASTM A36,” SPECTA Journal of Technology, vol. 5, 2021, [Online]. Available: https://journal.itk.ac.id/index.php/sjt
A. F. Abidah and N. S. Drastiawati, “Analisis SS400 Hasil Carburizing Media Arang Tempurung Kelapa-BaCO3dengan Variasi Temperatur Pemanasan dan Holding Time Ditinjau dari Pengujian Kekerasan dan Struktur Mikro,” Surabaya, 2019.
M. A. J. Somers, “Nitriding and nitrocarburizing: Status and future challenges,” 2013. [Online]. Available: https://www.researchgate.net/publication/287263972
V. Puspasari, M. A. Prasetyo, J. V. T. Hala, M. S. Anwar, S. Herbirowo, and E. Mabruri, “Pengaruh Annealing Terhadap Kekerasan Dan Struktur Mikro Baja Tahan Karat AISI 410-3MO-3Ni,” Metalurgi, pp. 75–82, Oct. 2020.
T. J. Saktisahdan, U. Asahan, J. J. A. Yani, T. / Fax, and P. T. Mesin, “Pengaruh Proses Heat Treatment Terhadap Perubahan Struktur Mikro Baja Karbon Rendah,” 2019.
U. Nurini, G. Suka, and R. Marjunus, “Pengendalian Laju Korosi Baja Aisi 1018 Dalam Medium Korosif NaCl 3% Menggunakan Inhibitor Ekstrak Daun Ketapang (Terminalia catappa L.),” 2022. [Online]. Available: https://jemit.fmipa.unila.ac.id/
M. A. Sholikhin, A. Suprihanto, and Y. Umardani, “Analisis Pengaruh Perlakuan Panas (Heat Treatment) Terhadap Laju Korosi Pada Material Baja Karbon Menengah Aisi 1045 Pada Air Laut,” 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
