MANUFACTURE OF A SEMI-AUTOMATIC CUP SEALER WITH A CAPACITY OF 4 CUPS
DOI:
https://doi.org/10.34128/je.v13i1.422Keywords:
cup sealer, mikrokontroler, semi otomatis, fabrikasiAbstract
The rapidly growing packaging industry is driving the need for efficient technology for MSMEs. However, manual cup sealers on the market often result in loose seals and low productivity. This research aims to design and test a microcontroller-based, semi-automatic, 4-cup cup sealer to improve circuit neatness, system response, and seal quality stability.
The method used is tool engineering through an experimental approach, encompassing literature review, design, manufacturing processes (welding, turning, assembly), and testing of temperature and time variations. Test results indicate optimal performance is achieved at a temperature of 180–185°C with a pressing time of 4 seconds. This machine has been proven to improve production efficiency and quality consistency, making it an affordable technological solution for MSMEs and a foundation for future production capacity development.
References
Afan Arif Rahman, M., & Mahendra Sakti, A. (n.d.). Rancang Bangun Mesin Cup Sealer Semi Otomatis.
Dharmawan, H. A. (2017). Mikrokontroler Konsep Dasar dan Praktis (Tim UB Press, Ed.; Vol. 1). UB Press.
[2] Lubas Wahyudi, P., Yusuf, ), & Nurcahyo, E. (n.d.). Penerapan Teknologi Pengemasan dengan Alat Sealer Cup untuk Peningkatan Produktivitas Produksi Minuman Jamu Herbal 1).
[3] Mulya Anhar, A., & Mahendra Sakti, A. (n.d.). Analisa Hasil Pengujian Mesin Cup Sealer Semi Otomatis.
[4] Mulyadi, D., & Nanda, R. A. (2023). PROSES PRODUKSI MANUFAKTUR GET PRESS INDONESIA. https://www.researchgate.net/publication/374386043
[5] Pamungkas, P., Patma, T. S., & Ikawanty, B. A. (2020). Otomatisasi Pada Sistem Kontrol Penutup Cup Sealer Dengan Metode Logika Fuzzy. Jurnal Elkolind, 7.
[6] Sari, N. H. (2018). Material Teknik (D. Novidiantoko & F. N. Subekti, Eds.; Vol. 1). CV. Budi Utama.
[7] Sunaryo, W., Dewanto, Y., Studi, P., Elektro, T., & Industri, T. (2023). RANCANG ULANG MESIN SEALER CUP SEMI OTOMATIS. Jurnal Teknologi Industri, 12(1).
[8] Supriyadi Dwi Suryanto Anthon Rudy Wardiyanto Taufik Jl Surya Kencana No, E., Gd, P. A., & Pamulang Tangerang Selatan -Banten Otomasi Industri, U. (n.d.). OTOMASI INDUSTRI. https://unpampress.unpam.ac.id/
[9] Tjiptady, B. C., Rahman, R. Z., & Meditama, R. F. (2021). Sistem Kendali Berbasis MIKROKONTROLER (R. I. Tarecha, Ed.; Vol. 1). Jejak Pustaka.
[10] Umami, M. K. (2021). Proses Manufaktur Operasi Pemesinan dan Perakitan (A. Zarkasyi & F. Muhammad, Eds.; Vol. 1). CV. Literasi Nusantara Abadi.
[11] Wiryosumarto, H., & Okumura, T. (2000). Tekonologi Pengelasan Logam. PT. Pradnya Paramita.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
