PENGARUH VARIASI PENGASAPAN SERAT SABUT KELAPA SEBAGAI KOMPOSIT TERHADAP KEKUATAN IMPACT
DOI:
https://doi.org/10.34128/je.v9i2.218Keywords:
Fumigation, Composite, Coir, ImpactAbstract
This study aims to determine the mechanical strength properties of coco fiber composites with changes in fumigation time versus impact strength. In this study, we used an experimental approach in which the 100 cm height non-fumigation coir composite was varied in fiber fumigation time for 3, 4, and 5 hours, and the strength of the fumigated coir composite was compared with that of the fumigated coir composite. fiber. compared to - Unfumigated composite materials. Based on the data analysis, the impact strength of the composite tends to decrease, with the fumigasion fiber having an impact value of 0.0404 J/mm2 at 3 hours and the fumigation fiber having an impact value of 0.0274 J/mm2 at 4 hours. has the fumigasion fiber for 5 hours per hour has an effect rate of 0.0241 J/mm2 and without smoking the effect rate is 0.0269 J/mm2.
References
A. Gundara and M. B. N. Rahman, “Sifat Tarik, Bending dan Impak Komposit Serat Sabut Kelapa-Polyester dengan Variasi Fraksi Volume”, J.MPM (Jurnal Material Dan Proses Manufaktur), Vol.3 No.1 pp 10–19, Jun. 2019
Mulyo, B. T., and Yudiono, H., “Analisis Kekuatan Impak Pada Komposit Serat Daun Nanas Untuk Bahan Dasar Pembuatan Helm SNI”, J. Kompetensi Teknik, Vol 10 No.2 pp 1–8, Nov. 2018
Pambudi, R. L., amd Yudiono, H., “Pengaruh Orientasi Sudut Serat Pandan Duri Terhadap Ketangguhan Impact Komposit Sebagai Material Alternatif Bumper Mobil”, J. Kompetensi Teknik, Vol.12 No.2 pp 21–29, Nov. 2020
Ahmadi Nugraha, A., Diharjo, K., and Raharjo, W. W., “Pengaruh Kandungan Serat dan Perlakuan Alkali terhadap Sifat Tarik, Bending dan Impak Bahan Komposit Serat Aren-poliester”, J. Teknik Mesin Indonesia, Vol.15 No.2 pp 34–38, Oct. 2020
Maryanti, B., Arifin, K., and Saputro, A. N. P., “Karakteristik Kekuatan Impak Komposit Serabut Kelapa Dengan Variasi Panjang Serat”, J. Seniati, pp 339–343, Feb. 2019
D. A. A. Ritonga, “Karakteristik komposit serbuk kenaf terhadap pengujian impak”. J. Wahana Inovasi, Vol.7 No.1 pp 1–11, Jan. 2018
A. Zainuri, Sinarep, A. Purwoko, and Nurkaliwantoro “Pengaruh Jenis Anyaman Dan Fraksi Volume Serat Terhadap Kekuatan Bending dan Impact Komposit Serat Rami Dengan Matrik Resin Polyester” J. Momentum Vol.15 No.2 pp 144-149, Oct. 2019
J. S. Bale, “Buku Material Komposit Polimer Berpenguat Serat”, D.I Yogyakarta, Penerbit Buku Pendidikan Deepublish CV. Budi Utama Sleman, 2022
T. Surdia, “Buku Pengetahuan Bahan Teknik”, 6th ed., Jakarta, Penerbit Pradnya Paramita, 2005
B. T. Sofyan, “Buku pengantar Material Teknik”, Jakarta, Penerbit Salemba Teknika, 2010
Annu. Book of Standards, ASTM D 5942-96, “Standard Test Method for Determining Charpy Impack Strength of Plastic”, 1996.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
