DESIGN AND CONSTRUCTION OF A FURNACE FOR AN INCINERATOR
DOI:
https://doi.org/10.34128/je.v13i1.370Keywords:
insinerator, tungku pembakaran, rancang bangun, variasi sampah, pengelolaan sampahAbstract
The accumulation of waste has become a serious issue in Indonesia due to limited landfill space and the lack of an effective waste management system. One alternative solution is the use of an incinerator as an environmentally friendly waste-burning device. This study aims to design and construct the combustion chamber of an incinerator and to test its effectiveness on three types of organic waste variations: dry, wet, and mixed. The method used is a design and build approach, which includes designing with AutoCAD and SketchUp, constructing the physical structure, and conducting combustion tests. The results show that the chamber can accommodate 2–3 kg of waste per batch and can reach a maximum temperature of up to 110°C. The fastest burning time was achieved with dry waste at 16 minutes and 21 seconds, with a combustion rate of 1.95 grams/second. This incinerator, with its simple design and low cost, is effective in reducing waste volume and produces ash that can be used as fertilizer. It is hoped that this incinerator can be widely adopted by communities to help address the waste problem.
References
[1] E. Permana, “Indonesia hasilkan 67 juta ton sampah pada 2019,” 2019. [Online]. Tersedia: https://www.aa.com.tr/id/heladlinel-hari/indonesia-hasilkan-67-juta-ton-sampah-pada-2019/1373712
[2] A. Setiawan, “Membenahi Tata Kelola Sampah Nasional,” 2021. [Online]. Tersedia: https://indonesia.go.id/kategori/indonesia-dalam-angka/2533/membenahi-tata-kelola-sampah-nasional
[3] B. Martana, S. Sulasminingsih, P. Studi, T. Mesin, P. Studi, and T. Industri, “Perencanaan dan uji performa alat pembakar sampah organik,” vol. 13, pp. 65–71, 2017.
[4] Bagus PT, “Pengelolaan dan Pemanfaatan Sampah Menggunakan Teknologi Incenerator,” J.Teknol. Lingkung., vol. 3, no. 1, pp. 17–23, 2002.
[5] R. Dewi, F. Hadinata, Y. Yulindasari, dan K. M. Aminuddin, “Sistem pengolahan sampah domestik dengan menggunakan incinerator drum bekas,” Applicable Innovation of Engineering and Science Research (AVoESR), pp. 891–896, 2020.
[6] Budiono, E., Purnomo, H., & Khotimah, S. N.(2022). Efek Asap Sampah Terhadap Kesehatan Paru-Paru dan Jantung:Sebuah Kajian Sistematik. Jurnal Kesehatan Masyarakat, 10(2), 103-111.
[7] Prasetiyadi, P., Wiharja, W., & Wahyono, S. (2018). Teknologi Penanganan Emisi Gas Dari Insinerator Sampah Kota. Jurnal Rekayasa Lingkungan, 11(2).
[8] N. Miskolczi, A. Angyal, L. Bartha, and I. Valkai, “Fuels by Pyrolysis of Waste Plastics from Agricultural and Packaging Sectors in a Pilot Scale Reactor,” Fuel Processing Technology, vol. 90, no. 7–8, pp. 1032–1040, 2009.
[9] P. G. Nidoni, “Incineration process for solid waste management and effective utilization of byproducts,” Int. Res. J. Eng. Technol., vol. 4, 2017.
[10] D. P. Lolo, “Analisis penggunaan incinerator pada pengolahan sampah di Kota Merauke,” Jurnal Ilmiah, vol. 3, pp. 200–211, 2014.
[11] B. Li, H. Pang, dan H. Tian, “Digital intelligent design of interior solutions: Exploring embedded systems for SketchUp modeling,” Computer-Aided Design and Applications, pp. 146–165, 2023. [Online]. Tersedia: https://doi.org/10.14733/cadaps.2024.S8.146-165
[12] A. Syahrani, N. Naharuddin, dan M. Nur, “Analisis kekuatan tarik, kekerasan, dan struktur mikro pada pengelasan SMAW stainless steel 312 dengan variasi arus listrik,” Jurnal Mekanikal, vol. 9, no. 1, 2018.
[13] T. T. Erwin Wijayanto, “Perancangan dudukan mesin gerinda tangan yang ergonomis dengan menggunakan metode antropometri,” Jurnal Teknik Industri, pp. 42–48, 2022.
[14] U. Bayu Teguh, Modul Ajar Dasar AutoCAD 2016, 2017.
[15] “ Mengenal SketchUp beserta fungsi dan 4 versinya,” 23 Mei 2023. [Online]. Tersedia: https://asdadimas.com/artikel/sketchup-adalah/
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
