MAINTENANCE SELANG ATAU JARUM (VIBRATION NEEDLE) PADA MESIN VIBERATOR INTERNAL PT. WKB
Keywords:
Maintenance, Vibrator Internal, Vibration Needle, Breakdown Maintenance, Preventive MaintenanceAbstract
The maintenance of hoses or needles (vibration needles) in internal vibrators is crucial to ensure the quality of concrete production at PT. WKB. The main issue addressed in this internship report is the frequent damage to vibration hoses, which reduces work efficiency. The purpose of this activity is to understand the proper maintenance methods to extend the equipment's service life. The methods used include field observations, literature studies, and interviews with technicians. The findings show that breakdown maintenance is still predominantly applied, with common damages such as wear on the flexible shaft and needle head. Routine maintenance, such as lubrication, cleaning, and checking connections, can significantly reduce the frequency of breakdowns. In conclusion, consistent application of preventive maintenance improves the reliability of internal vibrators and supports the smooth production of precast concrete.
References
[1] Y. Cai, J. Moore, and Y. S. Lee, “Vibration study of novel compliant needle used for vibration-assisted needle insertion,” Comput. Aided. Des. Appl., vol. 16, no. 4, pp. 742–754, 2019, doi: 10.14733/2019.742-754.
[2] I. M. Sastra Wibawa and N. P. Suda Nurjani, “Intervensi Ergonomi Dalam Penggunaan Vibrator Sebagai Alat Pemadat Beton,” J. Ilm. Vastuwidya, vol. 6, no. 1, pp. 1–8, 2023, doi: 10.47532/jiv.v6i1.773.
[3] D. Bagus Setyawan and Sufiyanto, “Metode Vibration Analysis Dalam Aplikasi Perawatan Mesin,” Transmisi, vol. 9, no. 2, pp. 921–930, 2013.
[4] T. Hp, D. I. Pltu, and B. Labuan, “Laporan kerja praktik corrective maintenance pada medium speed mill 2a tipe hp963 di pltu banten 2 labuan pgu,” 2023.
[5] T. Sitorus, H. Dabukke, H. Situmorang, and F. Priyulida, “Analisa Pemeliharaan Korektif Pada Syringe Pump,” J. Mutiara Elektromedik, vol. 6, no. 2, pp. 46–50, 2022, doi: 10.51544/elektromedik.v6i2.3568.
[6] A. Nan Agung and S. Safaruddin, “Perawatan Pada Mesin Belt Bucket Elevator 51Be45 Di Pt Semen Baturaja (Persero) Tbk Melalui Hasil Vibrasi,” Paradig. J. Multidiscip. Res. Innov., vol. 1, no. 02, pp. 68–76, 2023, doi: 10.62668/paradigm.v1i02.754.
[7] G. Sihombing, “Analisis Penentuan Target Objektif Pemeliharaan Mesin Berdasarkan Kriteria Downtime,” IMTechno J. Ind. Manag. Technol., vol. 4, no. 2, pp. 78–83, 2023, doi: 10.31294/imtechno.v4i2.1950.
[8] P. Journal and O. F. Science, “Pemeliharaan dan perawatan Three Cylinder Air,” vol. 4, no. 2, pp. 94–97, 2024.
[9] K. Pranata and J. A. S. TEKMAPRO, “Penerapan Sistem Perawatan Mesin Niagara Filter Menggunakan Metode Preventive Maintenance Dengan Klasifikasi Ismo Di Pt Xyz,” Tekmapro, vol. 19, no. 2, pp. 218–229, 2024, doi: 10.33005/tekmapro.v19i2.418.
[10] M. R. Akbar and W. Widiasih, “Analisis Perawatan Mesin Bubut dengan Metode Preventive Maintenance Guna Menghindari Kerusakan Secara Mendadak dan Untuk Menghitung Biaya Perawatan,” J. SENOPATI Sustain. Ergon. Optim. Appl. Ind. Eng., vol. 4, no. 1, pp. 32–45, 2022, doi: 10.31284/j.senopati.2022.v4i1.3086.
[11] T. D. K. Luke Pramuditta, “PADA PEKERJA DI INDUSTRI BETON PRACETAK (Studi Kasus PT SCG Pipe And Precast Indonesia) THE MACHINE VIBRATION EXPOSURE EFFECT TO FATIGUE AND HAND ARM VIBRATION SYNDROME (HAVS) ON WORKERS IN THE PRECAST CONCRETE INDUSTRY (Case Study: PT SCG Pipe And Precas,” J. Tek. Lingkung., vol. 22, pp. 42–51, 2016.
[12] G. Muhaemin and A. E. Nugraha, “Penerapan Total Productive Maintenance (TPM) Pada Perawatan Mesin Cutter di PT. XYZ,” J. Ilm. Wahana Pendidik., vol. 8, no. 9, pp. 205–219, 2022, [Online]. Available: https://doi.org/10.5281/zenodo.6645451
[13] A. Mutaufiq and I. Aissyah, “Pengaruh Perencanaan Bahan Baku Dan Pemeliharaan MesinTerhadap Efektifitas Proses Produksi (Survei Terhadap PerusahaanManufaktur Di Kawasan Industri Jababeka Cikarang),” J. Ekon. dan Bisnis, vol. 1, no. 1, pp. 48–60, 2021, [Online]. Available: https://doi.org/10.56145/ekonomibisnis.v1i1.31
[14] B. N. S. Indonesia, “Spesifikasi Beton Struktural,” Sni 68802016, vol. 1, pp. 1–156, 2016.
[15] D. Yusri and C. Anwar, “EVALUASI PENERAPAN TOTAL PRODUCTIVE MAINTENANCE PADA LINI PRODUKSI PACKHOUSE DI PT XWZ, Tbk- NAROGONG PLANT,” J. Sains Terap., vol. 12, no. Khusus, pp. 1–14, 2022, doi: 10.29244/jstsv.12.khusus.1-14.
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 ELEMEN : JURNAL TEKNIK MESIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
